uClamp-S

The flange bracket is designed for mounting the following devices on a flat flange:

• Zima2-B direction-finding antennas (and their modifications)
• uWave USBL modems
• Zima2-R responder beacons
• uWave Max modems
• RedNode navigation receivers
• RWLT Pinger beacons

For devices with a zero direction, such as the Zima2-B and uWave USBL antennas, the half-rings have a special groove, and the position is marked on the cover with a round recess. The bracket is made of Delrin (polyacetal) and supplied with stainless steel fasteners

Purpose

uClamp-S holds a cylindrical device on a flat flange. The bracket is made of Delrin, which resists external influences, and the cable exits from the side. For antennas with a zero direction (Zima2-B and uWave USBL) the bracket fixes that direction: the position is marked by the groove in the half-rings and the round recess on the cover.

Compatibility and systems

The bracket is used with devices of the Zima2 USBL, RedWave and RWLT navigation systems: Zima2-B direction-finding antennas, Zima2-R responder beacons, RedNode navigation receivers and RWLT Pinger beacons, as well as uWave USBL and uWave Max modems.

Design and specifications

The bracket consists of a cup, a cover and two half-rings. Its dimensions are Ø88×58 mm. It attaches to the flange with four M8 screws; the half-rings are clamped with four ISO 7380-2 M6×20 mm screws and the cover with four DIN 7991 M6×40 mm screws. When mounting Zima2-B and uWave USBL, the round recess on the cover must line up with the antenna's zero direction.

Documentation

The fastening hole layout and a 3D model of the assembled bracket (STEP) are available in the specification on docs.unavlab.com.